Description
Springer Performance Of Cement-Based Materials In Aggressive Aqueous Environments State 2015 Edition by Mark Alexander Alexandra Bertron Nele De Belie
Concrete and cement-based materials must operate in increasingly aggressive aqueous environments which may be either natural or industrial. These materials may suffer degradation in which ion addition and/or ion exchange reactions occur leading to a breakdown of the matrix microstructure and consequent weakening. Sometimes this degradation can be extremely rapid and serious such as in acidic environments while in other cases degradation occurs over long periods. Consequences of material failure are usually severe - adversely affecting the health and well-being of human communities and disturbing ecological balances. There are also large direct costs of maintaining and replacing deteriorated infrastructure and indirect costs from loss of production during maintenance work which place a great burden on society. The focus of this book is on addressing issues concerning performance of cement-based materials in aggressive aqueous environments by way of this State-of-the-Art Report. The book represents the work of many well-known and respected authors who contributed chapters or parts of chapters. Four main themes were addressed: I. Nature and kinetics of degradation and deterioration mechanisms of cement-based materials in aggressive aqueous environments II. Modelling of deterioration in such environments III. Test methods to assess performance of cement-based materials in such environments and which can be used to characterise and rate relative performance and inform long term predictions IV. Engineering implications and consequences of deterioration in aggressive aqueous environments and engineering approaches to the problem. Table of contents : Preface.- Part I. Mechanisms of degradation of cementitious materials in aggressive aqueous environments: General introduction to Part I by A. Bertron.- Sulfate attack of concrete by E. Menendez T. Matschei and F.P. Glasser.- Magnesium attack of cementitious materials in marine environments by M. Santhanam.- Leaching of cementitious materials by pure water and strong acids (HCl and HNO3) by J. Duchesne and A. Bertron.- Ammonium nitrate attack on cementitious materials by G. Escadeillas.- Attack of cementitious materials by organic acids in agricultural and agrofood effluents by A. Bertron and J. Duchesne.- Part II. Modeling degradation of cementitious materials in aggressive aqueous environments: Modeling degradation of cementitious materials in aggressive aqueous environments by E. Guillon P. Le Bescop B. Lothenbach E. Samson and K. Snyder.- Part III. Methods for testing concrete degradation in aggressive aqueous environments: General considerations by N. De Belie.- Tests for leaching and degradation in soft or carbonated waters by M. Castellote.- Test methods for resistance of concrete to sulfate attack - a critical review by K. Van Tittelboom N. De Belie and R.D. Hooton.- Testing for degradation by inorganic acids by M.G. Alexander and N. De Belie.- Bacteriogenic sulfuric acid attack of cementitious materials in sewage systems by K.L. Scrivener and N. De Belie.- Test methods for chloride transport in concrete by Q. Yuan and M. Santhanam.- Test methods for magnesium attack by M. Santhanam.- Methods for testing cementitious materials exposed to organic acids by A. Bertron.- Part IV. Cementitious materials performance in aggressive aqueous environments - engineering perspectives: Cementitious materials performance in aggressive aqueous environments - engineering perspectives by A. Chatterjee and A. Goyns.- Author Index.